Provide liquidity and earn trading fees on Arc Network
Total TVL
$0.00
💰 Your Deposits
$0.00
Active Pools
0
Create a pool with any tokenAnyone can do this
Not listed below? Pick any two tokens and add liquidity — the pool is created on-chain automatically if it doesn't exist yet. It won't be added to the curated list, but it'll always show up under "My Positions".
My Positions
No V3 positions yet — add liquidity to a pool below to open one.
Connect your wallet to see your positions.
ArchielSwap V3 Concentrated Liquidity
Not listed above? Pick any two tokens and add liquidity — the pool is created on-chain automatically if it doesn't exist yet. It won't be added to the list above, but it'll always show up under "My Positions".
Updated: —
$
Staking Pools
Stake tokens and earn real-time rewards on Arc Network
Total Staked Value
$0.00
⚡ Accrued Rewards
$0.000000
Active Pools
0 / 5
My Staking Positions
No active staking positions yet — stake a token below to get started.
Connect your wallet to see your staking positions.
R
Withdraw REGAR
Unstake
Withdraw your staked tokens back to your wallet at any time.
Currently Staked0.00
Accrued Rewards (will be claimed)0.0000
Amount to Withdraw
You will receive
Principal0.00 REGAR
Rewards0.0000 REGAR
Total0.0000 REGAR
REGAR
50%
0.00
0.0000
🔒
Vault
Auto-compounding liquidity vault — deposit once, let the vault reinvest swap fees for you
All Users
Total Deposits
Total Vault Shares
0.00000000
Raw sum across pairs — each pair's own scale
Total Vault (Est.)
$0.00
Performance Fee
5%
This vault runs on ArchielVaultV3.sol, built on ArchielSwap V3 (concentrated liquidity): deposits are pooled into a single grid-ranged position under the vault's address, shares track your proportional claim, and harvest() compounds swap fees (minus a 5% performance fee and a 0.5% reward to whoever calls harvest — anyone can, including you) back into the position. The contract has not been audited — use at your own risk.
Legacy Vault Found — Please Withdraw
You still have funds in RegarVault, the old vault contract that ArchielVaultV3 replaced. It no longer accepts new deposits. Withdraw your balance below, then feel free to deposit into the new Vault above.
Lend & Borrow
Deposit cirBTC as collateral and borrow USDC against it on Arc Network
Collateral Deposited
0.00000000 cirBTC
$0.00
Borrowed
0.00000000 USDC
Available to Borrow
0.00000000 USDC
Pool Liquidity
0.00 USDC
Supply / Earn
APY 8.00%
Your Deposited Value
$0.00
Accrued Yield0.000000 USDC
Total Claimable0.000000 USDC
Deposited: 0%
Wallet (idle): 0%
AssetBalanceSupplied
cirBTC
Balance0.00000000cirBTC
Supplied0.00000000cirBTC
Wallet Balance / Supplied ($0.00 / $0.00)
Amount|
cirBTC
Supply USDC → Earn YieldSupplied:0.00 USDC
Amount|
USDC
Borrow / Debt
APR 10.00%
Your Borrowed Value
$0.00
Interest Accrued0.000000 USDC
Total Owed0.000000 USDC
Borrow Health Factor
∞
No active loan
AssetBalanceBorrowedBorrow APR
USDC
APR 10.00%
Balance0.000000USDC
Borrowed0.000000USDC
Borrow up to50% of your collateral value.
Amount|
USDC
*Borrow APR and Supply APY are variable and set by the protocol owner. Rates shown are live from the contract. Testnet only — not for real funds.
This is a testnet lending pool running on the ArchielLendingBorrowV3 smart contract (0x7Cb02904cFB93c5608e042128C2Dd519EEf51fe6). Borrow APR and Supply APY are variable and accrue per-second on-chain. There is no automatic liquidation, and only one active loan is allowed per wallet at a time. The contract has not been audited — testnet demo only, not for real funds.
Futures/Perp temporarily disabledOpening new positions is temporarily paused on Arc Testnet.
Opening a position locks your USDC margin on-chain via the Arc Network pool contract.
ArchielFxEscrow hasn't been deployed yet (or its address/FX token addresses aren't configured in this app), so swaps below will fail. Live Pyth prices and quotes will still work once an address is set.
Archiel FX temporarily disabledOpening new positions is temporarily paused on Arc Testnet.
Live Price (Pyth)
$0.0000
ArchielFxEscrow · Pyth-priced · No leverage
EUR/USD
+0.00%
Waiting for live price ticks…
FromBalance: 0.00
To (estimated)Balance: 0.00
Rate—
Escrow fee—
SettlementInstant · ArchielFxEscrow liquidity
Swaps settle instantly against ArchielFxEscrow's own seeded liquidity, priced off live Pyth feeds — there's no margin, no leverage, and no position to close. GBPC/JPYC/AUDC/sXAU/sXAG only appear once their ArchielFxToken is deployed and configured on the escrow.
Recent FX Swaps
0
No swaps yet
Deposit to Trading Balance
Trading Balance deposit/withdraw is temporarily unavailable while the Perpetual contract is being upgraded. Your funds are not affected — this only pauses new deposits/withdrawals.
Your Trading Balance is separate from your main wallet balance. Only USDC you deposit here can ever be used as margin for Perpetual trading — the rest of your wallet is never touched. Deposit locks USDC into the Perpetual contract; withdraw anytime to move it back.
Main Wallet Balance0.00 USDC
Current Trading Balance0.00 USDC
Move USDC out of your Trading Balance back to your main wallet. Only the portion not currently locked as margin in an open position is available.
Available to Withdraw0.00 USDC
Withdraws USDC from your segregated Trading Balance on the Perpetual contract back to your connected wallet on Arc Network. This does not touch any open margin positions — close a position first if you need USDC that's currently locked as margin.
Partial Close
Realize PnL on part of this position now, and keep the rest open at the same entry price.
Position Size$0.00
Close %50%
Closing Size$0.00
Add more margin to this position from your Trading Balance. Size stays the same — this only lowers effective leverage and pushes your liquidation price further away.
Current Margin0.00 USDC
Available Trading Balance0.00 USDC
Select Token
No token matches that name or address.
Liquidity
Current price
—per ARCL
Full Range covers every possible price — behaves like a classic pool, no rebalancing needed.
Min price
Max price
Set a min and max price to preview the range
USDCBalance: 0.00
REGARBalance: 0.00
Pool APR--%
0.3% swap fee — 0.25% distributed to LPs · 0.05% to protocol
Withdraw for this pool is coming soon
Your position is safely deposited on-chain as an NFT. In-app withdrawal for concentrated-liquidity pools is being finished — check back shortly.
Your deposit
0.00 —0.00 —
💰 Accumulated LP Fees (0.25% of swaps)
FeeLoading...
FeeLoading...
Withdraw %50%
You will receive (principal + fees)
0.00—
0.00—
Claim Fees for this pool is coming soon
Fees are accruing to your position on-chain. In-app claiming for concentrated-liquidity pools is being finished — check back shortly.
💰 Claimable LP Fees (0.25% of swaps)
—Loading...
—Loading...
Fees accumulate from every swap through this pool. Claiming sends them directly to your wallet without touching your deposited liquidity.
No fees accumulated yet.
Stake
Amount to Stake0.00
Est. daily reward— —
Stake fee—
You'll have staked—
Deposit into Vault
Deposit both sides of the pair — the vault adds them as liquidity and mints you vault shares.
Amount (Token A)0.00
Amount (Token B)0.00
Withdraw from Vault
Withdraw your shares back to both underlying tokens.
Your Shares0.00000000
Shares to Withdraw
Rebalance Vault Position
Owner only. Closes the pair's current V3 position entirely and re-mints it around a new grid range — use this when price has drifted outside the range and the vault has stopped earning fees. Costs gas twice (decrease + re-mint).
Current range: —
🔧 Admin Panel
Manage staking pools — only visible to the owner wallet
🔐 Protected by Gnosis Safe Multisig (2/2)
All admin actions are routed through Safe — requires approval from both signers before execution.
This tab stays visible only as long as this wallet stays connected in this browser. Always disconnect when you're done, or the next person to open this site here can see and use it too.
ArchielSwapFactoryV3 — shows all pools created via factory. Each pool address is needed to seed liquidity below.
Click Refresh to load V3 pools from factory.
➕ Create V3 Pool
Deploys a new concentrated liquidity pool via ArchielSwapFactoryV3. Run this once per token pair + fee tier. After creating, seed it below.
🔍 Custom Token A
?
—
—
🔍 Custom Token B
?
—
—
💧 Seed V3 Liquidity
Mints the first position on an existing V3 pool. Sets the initial price and deposits reserves. Pool must exist first (create above).
Used to initialize the pool's sqrtPriceX96. Must match market rate.
➕ Increase V3 Liquidity
Adds liquidity to an existing position (same tokenId, same tick range) instead of minting a new one. Use this for topping up an existing position's balance.
Both amounts are "desired" — the contract only consumes what the tick range/current price actually requires (same as mint). Load the position first so the ratio can be estimated correctly.
📊 Change V3 Pool APR (local override — recalculated live from real swap volume every ~15 min, once a pool has ≥3 recent swaps)
Updates the displayed APR for a V3 pool in the frontend.
💸 Collect V3 Position Fees
Collect accrued swap fees from a V3 position NFT via PositionManager.collect(). Enter the tokenId of the position to collect from.
🔐 Manage Vault Pairs
ArchielVaultV3 — owner only. A pair must be registered here before Deposit to Vault works for it. The pair's pool must already exist on ArchielSwap V3.
Vault Status: —
Pausing blocks new deposits only — existing depositors can always withdraw and harvest.
Click Refresh to load registered vault pairs from contract.
➕ Register New Vault Pair
🔍 Custom Token A — Lookup by Contract Address
?
—
—
🔍 Custom Token B — Lookup by Contract Address
?
—
—
Fills Token A/B addresses and Grid Lower/Upper directly from the position's actual tick range on-chain, so the vault's grid always matches the real position instead of a hand-typed guess.
Note: the pair must ALSO already exist as a pool on ArchielSwap V3 for this exact fee tier — the vault deposits into that pool's position manager under the hood, it doesn't hold reserves itself. A pair can be registered at multiple fee tiers at once (e.g. REGAR/USDC at both 0.05% and 0.30%) — each one is a fully separate vault with its own position and depositors. A tighter grid range earns more fees per dollar but needs periodic rebalance() (owner-only) once price drifts outside it.
🏦 Lending & Borrowing — v3
ArchielLendingBorrowV3 — multi-collateral. Semua operasi di bawah berlaku untuk collateral yang dipilih di selector Active Collateral.
On-chain Price
—
Live Price
—
Collateral Factor
—
Pool Liquidity
—
🎯 Active Collateral
Pilih collateral yang ingin dikelola. Semua operasi di bawah (Pyth Oracle, Manual Price, Factor, Rates, Enable/Disable) akan berlaku untuk token ini. Daftar otomatis diisi dari getAllCollaterals().
🔍 Custom Collateral Token — Lookup by Contract Address
?
—
—
?
—
—
📋 Collateral Registry
All collateral already registered on-chain via getAllCollaterals().
Click Load to fetch from contract.
➕ Register New Collateral
Calls addCollateral() — a one-time registration per token. First select a token in the Active Collateral selector above, then fill in the fields below.
⚠️ Hanya bisa dijalankan sekali per token. Kalau revert "Already registered" — token sudah terdaftar, pakai section di bawah untuk edit.
🔮 Pyth Oracle
Per-collateral oracle. Setup sekali — maxBorrow() otomatis track harga live.
Berlaku untuk: — pilih collateral dulu —
Checking...
sec
💲 Manual Fallback Price
Hanya aktif ketika Pyth oracle belum di-set atau stale.
Berlaku untuk: — pilih collateral dulu —
📐 Collateral Factor
Update LTV % — rasio maksimum borrow terhadap collateral yang di-deposit.
Berlaku untuk: — pilih collateral dulu —
%
📈 Interest Rates
Bps (100 bps = 1%). Supply APY harus lebih kecil dari Borrow APR.
Borrow APR berlaku untuk: — pilih collateral dulu —
Current: Borrow — / Supply APY (global) —
🔛 Enable / Disable Collateral
Calls setCollateralEnabled(token, bool). Disabling a collateral does not remove existing user deposits.
Applies to: — select a collateral first —
🗑️ Remove Collateral
Calls removeCollateral(token) — removes it from the registry. The token must already be disabled. User deposits are not affected.
Applies to: — select a collateral first —
⚠️ Disable the collateral before removing it. Once removed, the token can be re-registered via Register New Collateral.
💰 Fund Lending Pool
Deposit USDC into the LendingBorrowing contract so users have liquidity to borrow.
USDC
🚨 Emergency Withdraw
Calls emergencyWithdraw(token, amount) — withdraws any ERC-20 (including USDC) from the contract directly to the owner wallet. For emergencies or contract migration only.
💎 Perpetual Treasury
ArchielLiquidityPool — payout treasury used to settle winning trades.
Emergency functions — gunakan dengan sangat hati-hati. Tindakan ini tidak dapat dibatalkan.
🚨 Emergency Drain
Withdraws the entire token balance from the contract to the owner wallet. Use only in emergencies.
Powered by Circle CCTP
USDC Cross-Chain Bridge
Transfer native USDC to Arc Network via Circle's burn-and-mint protocol. No wrapped tokens, always 1:1.
Protocol
CCTP v2
Destination
Arc Network
Domain
26
Internal Wallet Mode: Your ARCHIEL wallet signs bridge transactions directly via RPC — no MetaMask needed. Make sure you have ETH or AVAX for gas on the source chain.
Balances on —
Destination
Arc Network
Connect wallet to see address
AmountBalance: —
Swap + Bridge: Your ETH will be swapped to USDC on Chain first (via Uniswap V3), then the USDC is bridged to Chain via CCTP. You receive native USDC on Chain.
≈ — USDC after swap
—
You Send
—
You Receive
—
Bridge Fee
Free
Est. Time
~20s
Swap on Chain · Bridge via CCTP · Arrive as USDC on Chain
Bridge in Progress
⚠️ Resume Failed Bridge
If attestation failed but burn succeeded, paste the burn tx hash to resume
Bridge History
No bridge transactions yet
How CCTP Works
① Your USDC is burned on the source chain
② Circle attests to the burn event via IRIS API
③ Native USDC is minted on Arc Network 1:1
No wrapped tokens · No liquidity pools · Always native USDC
